Chevy Impala SS Forum banner
1 - 11 of 11 Posts

· Premium Member
Joined
·
5,341 Posts
Had a 77 TA , have a 2nd gen F body bar on my Cutlass with ends cut off and welded , have an 2nd gen F bar on my wagon .
My observations the opposite
Never seen a hollow Gen2 bar .
 

· Premium Member
Joined
·
5,341 Posts
RIP , he was making a joke ,,,,,
B9Q, was missing specific parts IIR . Look at B35 parts lists in the parts book .
There is a bunch of " except B9Q " or " with B9Q"
My notes from back in 2005 show it missing things like rear speakers , seat mounts, moldings , quarter glass etc
 

· Premium Member
Joined
·
5,341 Posts
 

· Premium Member
Joined
·
5,341 Posts
FWIW These will not fit on any wagon. GM has a brace OEM that interferes with the DMR brace.
Don't think it was ever a clearance issue with a factory wagon gussets
Wood Gas Chair Machine Metal


More a length issue as the lower arm mounts are further apart than sedan while the upper spacing remains the same.
 
1 - 11 of 11 Posts
Top