Chevy Impala SS Forum banner
1 - 1 of 11 Posts

· Registered
65 Posts
L05 Caddy Intake
Parts Needed:

What to get from donor car:
Airbox from Cadillac TBI engine
Rubber boot (still attached to airbox with hose clamps on both sides)
Any intake hoses for the passenger side crankcase
Angled airbox stud from Cadillac throttle body
Two bolts to plug the old airbox stud holes

K&N cone filter # RU-3130
3" PVC pipe roughly 20" long
45 degree elbow for 3" PVC pipe
Optional small push-on filter for PCV intake (passenger side crankcase)

The airbox with stud can probably be gotten for around 10-15 bucks at a junkyard. The K&N filter listed costs about 30, and the small breather filter about 10 bucks.

Misc parts:
silicone sealant
PVC sealant
vise grips
various wrenches and sockets
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.