[TimmyG]

Does anyone know what they are so I buy the right size double din

 

[96Lt1civi]

The measurements of what part? Am I correct in assuming you mean the cutout for the radio?
If so, I measured 3 1/4" by 7 1/2"

Also, the factory radio is a din and half, Not a double din. You'll likely have to do some trimming to get a double din to work.

 

[TimmyG]

So I’m looking at the kenwood DMX4707S
With the etchus installing kit will that fit

 

[SSandman]

So I’m looking at the kenwood DMX4707S
With the etchus installing kit will that fit

I just installed The DetailSS kit and an Etchus kit with a DMX 9707s and either one fit fine. The DetailSS kit opening was a little larger which was nice for fitment but the Etchus kit looked a little better being tighter around the DIN (although I had to dremel out the opening just a little for the DIN to fit.

I just posted in another thread about the differences between the two kits though, worth reading. I'll post the link

 

[SSandman]

Recommendation

I have a 95 caprice wagon and I’m going to install a double din, would y’all recommend the etchus install kit And I’m going to put in a kenwood DMX4707S

www.impalassforum.com

Look for my post/pics at the bottom