now for the motor. didnt want to go too crazy cuz money is an issue...
F body heads ported, 7/16 studs and guide plates installed. 3 angle valve job, beehive springs. heads surfaced at a slight angle for compession.
intake matched ported, new rings and bearings, timing chain, gaskets and seals. LT4 hot cam. 1.6 roller rockers, new lifters and push rods, water pump drive delete ,clear image cats, try ys coated..still need to get throtle body and electric water pump. will attatch to stage 2 trans with 2500 stall then inland impire axtended aluminum drive shaft... more to come....old motor out
block, heads, intake,timing cover, water pump, assesorie bracket, oil pan, and valve covers powder coated