Chevy Impala SS Forum banner
1 - 1 of 1 Posts

· Registered
2,703 Posts
You hope it is there. Try that fix, it may work. Use a double wrench system with a flare wrench. Do not overtighten. But often it is the plastic tank that has a crack at the fitting. Then you get to try JB Weld or all manner of fixit type products but usually requires a new radiator which may not be a bad idea if it is original or high miles. Good luck.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.