[Mattia-SS]

So I failed at my first inspection. I put amber aftermarket turnsignals on the rear bumper but obviously failed somewherecwm6 They now work as stoplights aswell as turnsignals!! This is how I did:

Green Cable from lamp is cut and isolated.

Purple Cable were supposed to be left alone but cut by mistake (put together again at the pic)

Green Cable from car connected with yellow Cable from aftermarket turnsignal

Black Cable cut and both ends connected again with white Cable from aftermarket turnsignal.

 

[Mattia-SS]

in front:
cut white wire between brake switch and turn signal switch
in rear:
connect brake wire (coming at front) to new turn signal lamps
install new wires from center brake lamp to both (left and right) brake lights
open beer, you are done

CadillacOwners - those export lights are ugly as hell

Sorry me not understandcwm6

 

[Mattia-SS]

Oki I will give it a try this weekend. Thanks! You know about systembolaget??

 

[Mattia-SS]

I have never seen the posi lock connectors, maybe has to do with that I never do anything when it comes to wiring and stuff!

I think me and a friend will solve the turnsignal problem this weekend. Without the manual it would be really difficult. It was a very nice gift