Chevy Impala SS Forum banner
1 - 2 of 267 Posts

· Registered
Joined
·
153 Posts
I'm in the same boat as Gonzo I boxed the orginal control arms and bought urathane bushings.Also have the 1/4 flat stock just not enuff time to get it mocked up.
 

· Registered
Joined
·
153 Posts
Is it the angle the picture was taken at?or are the rod ends running up at an angle to meet the end links? it looks like the need to come down at least a couple of inches to be level.Seems to me at that angle once the bar starts to get loaded it would either bend the link or break it.
 
1 - 2 of 267 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top