Chevy Impala SS Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
694 Posts
Discussion Starter · #1 ·
Sorry for the simpleton post, but Im sure you guys have gotten used to it by now. lol Im heading to the dyno and wanted to throw on a new-er Opti and some new plugs. Just want to make sure Im gettin the most out of it.


Motor is :

SR 396 LT1 block 11.75 comp
AFR 210 LT4 heads (flow numbers should be attached)
Stock opti with MSD cap n rotor, MSD coil and wires also
Autolite Racing AR 3923 (gasket style plugs)
#42 Green Top Injectors


Any advice is welcome. I was thinking about .45 or so. I believe stock is around 50 but I could be wrong and Ive seen nitrous folks go down to around a .35, so I figured Id settle in the middle.


Thanks again for any help,
ZACH
 

·
Registered
Joined
·
694 Posts
Discussion Starter · #5 ·
Thanks alot guys, for all the help.
Ill go ahead and listen to Pat.

As for the plugs, Im not even too opposed to changing the kind of plugs, Im just using the ones AFR said should work.

ZACH
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top