Chevy Impala SS Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1,625 Posts
Discussion Starter #1
I'm In need of the A.I.R. fittings that thread into the exhaust manifolds for a 96 Impala. I Know there must be someone who has removed these and just has them laying around.
 

·
Registered
Joined
·
2,907 Posts
that's a hardware store part.
pics of mine my mech put in
https://www.facebook.com/media/set/?set=oa.1980798172143467&type=3

These are my notes from many years ago, taken from a thread on here somewhere:

AIR PUMP Delete
Dorman P/N #65226
For a 3/4-16, I used a drain plug from an 80s Volvo 760 (4 or 6 cylinder).

They are a 5/8" flare cap,if not removing the fitting inside the manifold
OR
Watts model # LFA-342 5/8“ flare cap from home depot

-ALF out...
 

·
Registered
Joined
·
1,625 Posts
Discussion Starter #3
that's a hardware store part.
pics of mine my mech put in
https://www.facebook.com/media/set/?set=oa.1980798172143467&type=3

These are my notes from many years ago, taken from a thread on here somewhere:

AIR PUMP Delete
Dorman P/N #65226
For a 3/4-16, I used a drain plug from an 80s Volvo 760 (4 or 6 cylinder).

They are a 5/8" flare cap,if not removing the fitting inside the manifold
OR
Watts model # LFA-342 5/8“ flare cap from home depot

-ALF out...
I'm not trying to cap the fittings, I'm trying to locate the fittings that go into the exhaust manifolds that the one way valves thread onto.
 
1 - 3 of 3 Posts
Top