Chevy Impala SS Forum banner

1 - 20 of 24 Posts

·
Registered
Joined
·
150 Posts
Discussion Starter #1
Looking to see if anyone has a set of Walker 24225 & 24226. These are the rear resonators (left & right) with tips in the 2.5" diameter for the 94-96 caprice/impala. They were avaiable 2 years ago but are now out of production. I have phoned Dynomax to confirm. Doing exhaust on my Caprice and wish i would have bought them 2 years ago. New or used (in good shape obviously). Let me know, thanks!
 

·
Registered
Joined
·
150 Posts
Discussion Starter #3
I phoned them and they can still order 24226 but finding 24225 has proven difficult. i really want a mellow sound and stock type mufflers and resonators will hopefully do the trick. worst case walker still makes stock resonators, but they are 2" diameter. it would definitely give it the sleeper look i am going for!
 

·
Registered
Joined
·
150 Posts
Discussion Starter #5
thanks sherlock. looks like the even the stock rear resonators are out of production aswell now that i look on rockauto. i was able to find one of the OTA pipes on amazon and the other one I found a Canadian supplier that claims they have stock of the other side that is out of production. so fingers crossed, because that will save me some $$$ getting custom exhaust work done. I found a 20" dynomax superturbo muffler 17749 that is only 1" longer than stock, so i am hoping it will work. if not I could run a 16" size that is close to what can with the now out of production 2.5" dynomax kit. i have a knock off set of dan's first gen tri-y's (focuztech) and i am hoping it will be quietiet than with the spintech sportsman xl's i have now. I have some "round" magnaflow resonatorw but they didn't
help much...
 

·
Registered
Joined
·
142 Posts
I’m on the lookout for Walker 24225 for few months now. I tried every possible vendor. Nobody has any. I pretty much gave up on it and now looking for another solution.
 

·
Premium Member
Joined
·
2,537 Posts
This seems to happen every other year or so. When I was in the market for some just two years ago I ran into the exact same problem. Shortly after I started looking Walker must have gone back into production, as it didn't take too long for me to get a pair.
 

·
Registered
Joined
·
150 Posts
Discussion Starter #9
FWIW when i talked to Dynomax on the phone they claimed they would not be produced again.
 

·
Premium Member
Joined
·
20,287 Posts
With a bit of work, a couple of Walker 24246's can be made to work.

Just a suggestion.

KW
 

·
Registered
Joined
·
8,462 Posts
With a bit of work, a couple of Walker 24246's can be made to work.

Just a suggestion.

KW
^^^. You can find SS turn down tips to put on them and weld on hangers

Or buy 2 of the correct one on Summit and just move the hanger to the other side

I have the 2.5" Dynomax resonator/tips. FWIW I also hit the wall when looking for new 2.5" over axle Dynomax pipes. I found the PS at Autozone for $22 a year or so ago but no one had the DS....until last month when it showed up at Autozone. It was $42

Like the Gates PS fill hose that is/was not available...some of these parts do re-surface.
 

·
Registered
Joined
·
150 Posts
Discussion Starter #12

·
Registered
Joined
·
150 Posts
Discussion Starter #18 (Edited)
last night both were avaiable when I purchased. i guess we will see if they show up.

edit: I dont have tracking number yet, probably not a good sign.
 

·
Registered
Joined
·
150 Posts
Discussion Starter #20
that's what i'm thinking. my items have yet to get shipped (i also ordered valve springs and a cam for my truck), so I will phone Summit tomorrow and see what's up I literally ordered 30 minutes after you, still hoping for the best.
 
1 - 20 of 24 Posts
Top