Chevy Impala SS Forum banner

Zex wet system and TPS wire....

3K views 2 replies 3 participants last post by  Klez 
#1 ·
Just got a smoking deal on a Zex Wet nitrous system. Got everything finally in order. Yes everything (plugs, fuel pump, racetronix etc.)
Ran all the wires and now am working on wiring.
Zex want to tap into the TPS wire to get max voltage to know when to turn on.
Is there any other way to trap into this wire without cutting it?
Maybe some sort of addition piece timing box whatever?
 
#3 ·
Bought a used ZEX kit once and didn't care for the looks for the cheap electronics, kept the bottle sold the rest. Use a WOT switch and a Mallory 685 box. With the 685 you can have it activate at whatever RPM you want and have it turn off during shifts and best of all you can pull timing. Don't forget a better fuel pump if you want a big shot.

http://www.impalassforum.com/vBulletin/showthread.php?t=258868&highlight=mallory+685
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top