93 Roadmaster Sedan Part out Silver w/gray interior - Chevy Impala SS Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 42 (permalink) Old 10-11-2010, 03:11 PM Thread Starter
Moderator
 
Goldmaster's Avatar
 
Join Date: Nov 2006
Location: Warren, MI
Posts: 9,682
 
Exclamation 93 Roadmaster Sedan Part out Silver w/gray interior

I am completely parting out a 93 Roadmaster (TBI 350). Almost everything is available (except for a few missing/already sold items which I will list below). I was told this car has a rod knock, but I was unable to confirm since the distributor was missing when I got it. The trans supposedly shifts great, but the fluid looks burnt and smells funky, so i don't think I'm going to bother to pull it. Other than that everything else is up for grabs. This car has the FE2 package with sway bars that I believe are the same as 9C1/SS. They are rusty looking, but still in good shape. Let me know what you want and your zip code and I'll give you a price. I prefer a check or money order, but will still accept paypal under certain conditions. PM me for details.


Stuff that's not available:
Alternator - Missing
Buick Brace - Missing
Distributor - Missing
Trunk Latch and catch - sold
Power Seat Rails - sold
Trunk Button/Release switch - Sold
ECM - Sold
Throttle Body -sold
Engine Harness - Sold
A-Pillar Plastic Pieces - Sold
Power Antenna - Sold
Complete Front Door Panels - Sold
Center Console - Sold
Fuse box lid - Sold


Okay, onto the pics! Sorry they are crooked, my LCD on the camera is out and I was just blindly aiming lol.










cleaned up the intake stuff a bit...
















Last edited by Goldmaster; 10-20-2010 at 07:00 AM.
Goldmaster is offline  
Sponsored Links
Advertisement
 
post #2 of 42 (permalink) Old 10-11-2010, 03:12 PM Thread Starter
Moderator
 
Goldmaster's Avatar
 
Join Date: Nov 2006
Location: Warren, MI
Posts: 9,682
 


Back seat is actually really nice, no tears or burns would clean up like new.


Passenger seat isn't bad (driver side is FUBAR)


Door panels are in great shape aside from some of the bezels yellowing from smoking)





Last edited by Goldmaster; 10-11-2010 at 03:17 PM.
Goldmaster is offline  
post #3 of 42 (permalink) Old 10-11-2010, 03:12 PM Thread Starter
Moderator
 
Goldmaster's Avatar
 
Join Date: Nov 2006
Location: Warren, MI
Posts: 9,682
 



Last edited by Goldmaster; 10-11-2010 at 03:20 PM.
Goldmaster is offline  
 
post #4 of 42 (permalink) Old 10-11-2010, 03:37 PM
Senior Member
 
bondovw's Avatar
 
Join Date: Oct 2006
Location: SF bay area / sonora ca
Posts: 2,224
 
I want the front door panels complete with arm rests switches lights ect, Steering wheel if not ripped , (pending pic) I do not need airbag, complete center console if working and no major rips, Wear is ok, Inside fuse box cover, I am in no hurry. I can do paypal or check or money order or? Also it would be cool if you were close to greyhound, they ship cheap! But you might get a fedex deal so thats up to you. Thanks

I tint tail lights and fix bad bondo!
bondovw is offline  
post #5 of 42 (permalink) Old 10-11-2010, 03:53 PM Thread Starter
Moderator
 
Goldmaster's Avatar
 
Join Date: Nov 2006
Location: Warren, MI
Posts: 9,682
 
Quote:
Originally Posted by bondovw View Post
I want the front door panels complete with arm rests switches lights ect, Steering wheel if not ripped , (pending pic) I do not need airbag, complete center console if working and no major rips, Wear is ok, Inside fuse box cover, I am in no hurry. I can do paypal or check or money order or? Also it would be cool if you were close to greyhound, they ship cheap! But you might get a fedex deal so thats up to you. Thanks
Okay, you got first dibs on the complete front panels, and other stuff you listed. Give me a day or so to back to you with a price. I'll also have to try and make sure I don't break them in the removal process.

Last edited by Goldmaster; 10-11-2010 at 04:10 PM.
Goldmaster is offline  
post #6 of 42 (permalink) Old 10-11-2010, 03:57 PM
Senior Member
 
bondovw's Avatar
 
Join Date: Oct 2006
Location: SF bay area / sonora ca
Posts: 2,224
 
If you got a door panel clip tool they work great! If the clip holders break off the back of the panel just get them off the doors so i can glue them back on. That almost always happens! Thanks!

I tint tail lights and fix bad bondo!
bondovw is offline  
post #7 of 42 (permalink) Old 10-11-2010, 09:30 PM
Member
 
CTX-SLPR's Avatar
 
Join Date: Jan 2004
Location: Livermore, CA
Posts: 92
 
Send a message via AIM to CTX-SLPR
How much for the complete climate control system (harness, control head, sensors plugged into said harness, vacuum block with as much of the hoses as you can get without going nuts, and servos) shipped to C-Springs, CO?

Thanks

Central TEXAS Sleeper
USAF Physicist

"There is no Replacement for Displacement"
Carroll Shelby

SOLD:
e(vil)Bay:
1970 Riviera (468-4, TH700R4)
1965 Riviera GS (#'s Matching, 425 2x4) (I'm going to miss her)
1967 Skylark (300-2, SP300)

Current:
1964 Riviera (4.1L Turbo6, 4L80E, L67 EFI system) EX:425-4, ST400
1998 Suburban K2500 (454, 4L80E/NP263)
2012 Hyundai Genesis Sedan (3.8L V6, 8spd Getrag)
ROA# 9790
CTX-SLPR is offline  
post #8 of 42 (permalink) Old 10-12-2010, 05:05 AM Thread Starter
Moderator
 
Goldmaster's Avatar
 
Join Date: Nov 2006
Location: Warren, MI
Posts: 9,682
 
Quote:
Originally Posted by CTX-SLPR View Post
How much for the complete climate control system (harness, control head, sensors plugged into said harness, vacuum block with as much of the hoses as you can get without going nuts, and servos) shipped to C-Springs, CO?

Thanks
PM sent.
Goldmaster is offline  
post #9 of 42 (permalink) Old 10-12-2010, 06:09 AM
Senior Member
 
impalassclone1994's Avatar
 
Join Date: Mar 2010
Location: Columbus, OH
Posts: 288
 
Cool

Do you know where I can get my hands on a set of those Clear Buick front door panels lights??? Looking for a Clear set to allow more light into the interior of the car???


1994 '95 '96 Impala SS Clone It has parts from them ALL!!! - 9C1 Package, 160* Thermostat,250+ amp alternator, F/R Drilled/Slotted Rotors,Factory 17inch Impala SS Rims, 255/50/17 Z-Rated Riken Raptors,MBA Billet Aluminum Caps, Covers, & Tinted Taillights.

impalassclone1994 is offline  
post #10 of 42 (permalink) Old 10-12-2010, 12:46 PM
Member
 
Join Date: Dec 2009
Location: Bucyrus, KS - south of KC
Posts: 73
 
parts

How much for the ecm, throttle body, and air intake stuff? Please let me know on the prices. Thanks man

1993 RMS Limited Gold - G80, tow pack, ss wheels
1994 RMS Gold - few pieces left
2002 Camaro Z/28 - LS1, 13k miles
93_Roadie is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Chevy Impala SS Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome