Chevy Impala SS Forum - View Profile: 94MI9C1

94MI9C1 94MI9C1 is offline

Senior Member

  Visitor Messages

Showing Visitor Messages 1 to 10 of 17
  1. strokedimpala
    06-04-2015 04:39 PM - permalink
    Hi Mike.I hope all is well.I noticed you had said you previously had worked on airbag setups.I am installing my setup now.Do u think it is ok to run the airlines inside the car to the front bags.
    If there are any other helpful tips u think I should know I appreciate it.
    Hows ur car going.I hope ur family is doing well.
  2. Devastator
    10-07-2014 08:14 PM - permalink
    my email is
    [email protected]
  3. SSd
    05-17-2014 03:45 PM - permalink
    Greetings from up I69,

    I have a LT1 question. I put a rebuilt stock engine (w/ 4L60E) from a '94 Impala SS into an '83 El Camino. I had a custom PCM tune from LT1 PCM Tuning out of Cincy. When I recently had the car in the shop, they reflashed to the stock tune. I cannot find my file with the custom tune. !!!! Needless to say, with not CATs, no charcoal filter, etc., things are not so good. I cannot get a reply from the Cincy guy when sending a message his way.

    Sorry for the long background. Bottomline, I wonder if you know of folks in Indy (or nearby) to whom I might take my car to get another custom PCM tune. I live off Exit 259, about halfway btw Indy and FW. Any help would be appreciated. Thx for considering, it is appreciated. dk

  4. dhboy817
    09-21-2012 02:17 PM - permalink
    Hey Mike so I was reading ur thread. Good stuff bro, u r bad ass! Okay so u know ur measurements and I wanna be sure on what my frame Guy is gonna do. I can't follow ur measurements cause u drive a caprice and I drive an impala so can u tell me,
    1. How much am I gonna take off the frame when I notch it?
    2. How thick will I need adapters to be?
    3. Will I need a bigger brake set up?
    4. Will my stock rear end be okay with rims being so wide in the back?
  5. heatman74
    01-17-2012 02:41 AM - permalink
    do you have any pics of the dbl din install "kit" you made? i am going to be installing a 7" lcd, and don't really feel like paying $180 for a install kit. thanks
  6. Turbocaprice
    12-04-2011 08:58 PM - permalink
    Did you ever get the push bar out of your attic for pics?
  7. heatman74
    11-29-2011 06:31 AM - permalink
    someone mentioned that you are the one to ask about installing a dual din stereo.
    Do you have modifiy the dash?
    is it a kit?
  8. HeavySleeper
    11-04-2011 08:56 PM - permalink
    just wanted to congratulate you on your Caprice winning ride of the month. You seem to be a pretty classy guy on here. The board needs more ppl like you. Congrats! Did u ever sell that roadmaster?
  9. Stoney
    06-27-2011 03:45 PM - permalink
    Sounds awesome..Thanks, Tony
  10. Chevyman164
    06-07-2011 06:30 PM - permalink
    I brought the 500 df McLeod clutch for my impala I was told I could use a pressure plate from a camaro or a parts store. Will this type of pressure plate hold up in are cars do I have to get a McLeod plate? Also what pressure plate do you have in your caprice if you don't mine me asking??? Any info will help thanks

  About Me


Total Posts
Visitor Messages
General Information
  • Last Activity: 07-16-2019 05:20 PM
  • Join Date: 06-03-2007
  • Referrals: 1


Showing Friends 1 to 10 of 20


No results to display...


No results to display...
For the best viewing experience please update your browser to Google Chrome