Damn Matt!! Your sick homie!!

 

OMFG ! That looks like it smarts. I'll second. Hand and eye protection, it's the new cool.

 

Nice but you are gonna add tubs and rework the metal right? Also what you have for suspension? Stock 4 link?

 

im going to get trailer fenders and add metal from there, i still need to determine whether or not the factory 4 link will work. I think it will if i extend the uppers more it will allow the axle to travel up high enough but i wont know till i finish cutting out the frame notch.

looks good. let me know if you need any pointers, hope it turns out good for you.

Thanks man i appreciate it.

 

looks good. let me know if you need any pointers, hope it turns out good for you.

 

props to you! id be scared to do that on my own, your brave.

 

hell yea...me2...lookin good though

 

cant wait to see what it looks like done...

 

i wont be scare but i probably weld a new sheet back on to cover the wheels dirt from getting in.

 

Obviously im going to weld sheet metal back in. I have the driver side notch all welded in and saturday ill do the passenger side and then cut out the section of frame that is under the notch. This is definitly taking more time than i had planned in my head, lol. Im just taking my time and making sure i dont miss anything along the way. I still need to cut the drive shaft tunnel and hopefully i will be able to set it on the ground this weekend.

 

so your going to try and lay frame on 4s also what 4s do you have....

 

Yes im going to lay frame (fingers crossed) ill post pics tomorrow after i finish getting done what i can.

 

Can't wait to see it done bro!

 

Where them pics???
Nice ride Rockstar.

 

dam you young guys are handling your business!!!!!!!!!!!!!!! more pics when you can

 

Im still working on it, i only get a couple hours a day to mess with it. i pretty much got both notches complete. ill post pics tomorrow.

 

Picture time!!....

 

Need spindles

Ride hieght

 

Well as of right now im satisfied with the stance, its not as low as rabbits but after consideration mine is a daily driver. Iam bottomed out on the rear lower control arms hitting the cross member that holds the upper control arms and the tires are hitting in the door jamb where the latch is bolted to (as rabbit mentioned would happen).I may just leave it as is and work on putting the metal back in so its ready for Slamfest. After then i will build a new cross member and run a two link.

 

Matt that ****t looks GOOD!

great job bro.

 

Matt that ****t looks GOOD!

great job bro.

yes it do...BALLPARK; what would somthing like this cost to do?...

 

Man I wish I had the cash to bag my car. That looks bada$$.

 

Well im officaly HATING.

I just ran out of Hateorade.

Looks goods, it would look even beter on my wagon.

 

Sooo NaSSty!! Lookin good man!! Swing it by the shop when your done.

 

Looking good.....
If I was gonna do something like this to my car I would go crazy with the sheet metal...

 

Thanks everyone, as for a time frame it took me a total of about two weeks adding up originally bagging it and doing the notch in the rear. I still have to put the wheel tubs in a adjust a few things and rework the suspension but if i had a full 8 hours a day to work on it 2 weeks would be no problem. Marcus i will definitly be by when im done, im going to start getting my collection of spare suspension parts to have you do your magic.

 

Car looks good, I like the wheels alot. I wish my caprice was newer without the skirted fender.

 

Look up Impalasstudio on here and ebay.

He makes fender flares so you can cut your wheel well out, some people like slammed capis with the skirt.

I have a set, but mines on a wagon and they were never opened up.

 

Yeah I've seen the fender flare kit but everything else on the car is shaved and I think it might look out of place. If they had a flare for the front then I would consider it. I just think the newer ones look way cleaner when there aired up and cruising.

 

With all the cuttin you've done already.. it should be easy for u to cut & weld quarter opening pieces off a 93-96 donor.. Thats what im looking to do next or those impala studio flares..

and Great work so far to both of yall