Nobody wants to show off their subs?

 

Have you used the search engine yet??

 

uhhh where you been bruh? the search is fubar'ed and so is all the old post...so there is nothing as a repost of a question anymore

 

Here are a few ideas I found, not sure what style I will go with just yet.

 

Here is mine... 100% done by myself (but patterned after Markus's original design). Ported through rear deck. Sealed from trunk (no rattles and very quiet in trunk while pounding inside of the car). Phoenix Gold Titanium amps, Eclipse 12" subs, 1.1cf/chamber, Focal comps in front and Alpine 2 ways in back. Hit 139.6db. SQ is EXCELLENT! Entire trunk and interior is double layered with fatmat sound killer.

I like showing it off, but not posting it much due to the amount of Q's that I get. Difficult to explain the full setup. I'll post pics in a couple of responses to give as much detail as possible to help answer questions...

Tim

Panel Mounts. Everything is hinged and swings up to get to adjustments and wires.

 

^^^That schit is nice

 

And the build pics...

General Box Design

Build pics...

 

Here is mine built by a friend.

 

Here is mine built by a friend.

man I know you spent a pretty penny on that system, how hard do the fi's hit? Ive always wanted a pair, amost bought one 15" last year

 

Not to thread jack, but, 1-CLN-SS how do you like your Fi subs? I'm thinking about a single BL 15.

 

I like them a whole lot better than the 4 JL w6 i went threw.They have been working pretty good with the 1000x1 JL amp on each one and the gain at only 75%.I would recommend them.

 

They hit pretty good.They could be louder if i where to open the port up some but i don't really turn it up that loud most of the time.What i need to do is upgrade my mids and highs cause they can't keep up.But over all they are good subs and you can't beat the price.

 

Here are some pictures of my set-up.

 

Yo what that is the 13" or the 10"

 

ShowSS, how many cubic feet is your box?

 

I never measured it but my guess its close to 3 cubes

 

Very nice work.

 

diamond shaped port tuned to 32 hz is mine. but ive always believed in, vented or ported. let the subs breathe!!!!!!!!!

 

does any 1 know if the measurementsare still the same for 3 12"

 

Damn Adam, ive been wanting to build a setup like this forever....your is nice bro.
What did you close off the back of the box with? plexi?

 

Thanks.... Yes the back is just 3/4 inch plexi sealed with weather stripping and screws every inch...

 

is that box ported into the rear speaker deck

 

where did u get the sheet of plexiglass

 

just looked up plastic suppliers in the phone book and found one close by that cut it to the size I needed

 

thanx

 

Damn that's a sweet box Adam.

 

That box looks good bro. I got a very similar set up.

 

I have had this poor man's setup since 2005......it may look tacky but it sounds damn good inside the car.....rattles from the outside a bit though.

Audiobahn amps and subs, Power Akoustik capacitor, and Infinity Kappas for interior speakers...the Audiobahn subs were quite cheap but were the best subs I ever bought, lasted way longer than the few Rockfords and Pioneers I've had before.

Do any of the setups already posted include space for a spare tire, if not. can some post a setup that includes spare tire storage?? I will feel naked going down the road without a spare tire.

 

Any body have any pics with a sub enclosure with the spare tire still in the trunk?

 

Here is my old setup. 2 10's. Pretty basic. Sounded good, but you should definitely open up a few holes in the rear deck for sound to flow through... This setup worked well for me for 2 years. There are several others that kept their spare. And there are always the "elusive" boxes that Hack built, but good luck finding them.

 

i wanna join this FULLY CUSTOM trunk club


this all i have for now

also made by adam SHOWSS12

 

I have pics in my thread about a quarter panel box with one 12 and keeping the spare. I have more pics I will post when I get back to the crib.

http://www.impalassforum.com/vBulletin/showthread.php?t=236997

 

Could you post dimensions for the box(s) as well when you post pics?