Most folks run the Energy Suspension Motor Mount Inserts. Come in 2 colors (Red/Black)
http://www.summitracing.com/search/...-350/Drivetrain/RWD/?keyword=Energy+Suspension+Motor+Mounts/Motor+Mount+Inserts

I have 2 I never got to install because of time restraints and the difficulty of the job.

 

Most folks run the Energy Suspension Motor Mount Inserts. Come in 2 colors (Red/Black).....

Get the black Energy Suspension mounts .

KW

 

And seeing as Mounts are Bushing oriented, I would relocate this into the suspension section.

 

I changed mine to the black energy suspension mounts on a engine swap I did

...I should say this part was a 2 man job with one working from above and the other from below. PIA to get wrench on all the old bolts but it was doable.

 

Jeez, doesn't somebody just make replacement mounts without all the fabricating?

 

Can anyone point out the right part # on this page http://www.summitracing.com/search/...-350/Drivetrain/RWD/?keyword=Energy+Suspension+Motor+Mounts/Motor+Mount+Inserts for my '95 9C1 ? Definitely going for the black type.

 

Pretty sure part number is posted in this thread...

http://www.impalassforum.com/vBulle...m.com/vBulletin/showthread.php?t=315970&highlight=Energy+suspension+motor+mount

...if not, just Search here "energy suspension motor mount" and you should find it and lots of other helpful info on the swap.

 

I didn't spot weld anything. Drilled the old shells apart cleaned them up and painted them. The black zip ties held them together just fine while I was bolting them in.

Using a fixed swivel socket wrench I picked up at Autozone, (no ratchet), and a ratcheting box end wrench up top I can get them in and out in about 15min.

-Brian